WiFi-o-Matic Pro Mod Apk
Certain CONTROLS can automatically switch on/off WiFi Bluetooth or mobile data traffic.
- There are two types of rules to consider: the SCREEN CELL ID TIME LOCATATION rule and the OFFLINE BREAKING
Energy saving tips
Protect your privacy
- Widgets (Pro version only)
It can be used to anonymize on the go. Regular data packets with device identifiers and activated WiFi/WLAN are sent. These packets can be interpreted by sniffers to create movement profiles. This is not for everyone.
Your smartphone's battery will last a lot longer if you shut down all the networks. WiFi-o-Matic offers many options for energy saving. You can define some controls, while others will be set by the app. Apart from its main purpose of conserving energy, the app can be used in a great way to make your phone go offline - i.e. Stop all data traffic while still allowing phone functions.
If you wish to connect, activate Wi-Fi at the beginning. WiFi-omatic will save this information and connect Wi-Fi when you are in the area.
You can divide the app into two sections: STATUS NEW CONTROLS or SETTINGS. You can see a list of active controls under STATUS. You can make changes to any control, and WLAN-omatic can also be stopped or started.
You can save and create a NEW CONTROL in the NEW CONTROLS Section.
The app's global settings can be found under SETTINGS. you can deactivate AUTO-LEARNING.
WiFi-o-Matic Pro provides the following control options: SCREEN ON/OFF Cell ID TIME, and LOCATION.
This is the case: ON precedes OFF, with TIME-and SCREEN ON/OFF control as an exception. In which case, OFF follows ON.
This control has the greatest power. When the screen is off, it ALWAYS switches off WiFi Bluetooth mobile and/or automated data synchronization. WiFi Bluetooth mobile data transfers and/or data sync are activated when the screen is switched on.
When your phone is connected to a specific mobile network, the CELL ID control will activate WiFi Bluetooth data traffic and/or data synchronization. This control does not depend on your location. You are connected to the same transmission towers, or cellular IDs. WiFi-omatic will remember your WiFi Bluetooth mobile data traffic and data synchronization settings.
CELL ID controls cannot be manually created or learned by the app. They are automatically learnt and saved in the app. You should disable the setting under SETTINGS if you do not need to learn any new CELLID controls. This control is the best and most efficient, so it should always be your first option. The LOCATION control has a similar function, but it needs a GPS signal to work. This will consume more energy. The CELLULAR ID control, while less precise than the LOCATION control, should still be considered your first choice.
TIME controls allow you to turn WiFi Bluetooth mobile data traffic or automatic data synchronization off again after a specified time. You can even define individual days. For example, you could turn your phone off at night between 11 PM and 7 AM. If you forgot to charge your phone overnight, this saves tremendous energy.
LOCATION is for those tablet users who are unable to receive mobile signals.
The OFFLINE BREAK interrupts CONTROLS that are in place and allows e.g. Wi-Fi.